BOSTIK 3 in 1 Flooring Adhesive, Adhesive, Sound and moisture control 16kg Drum

More about the product Ultraset® 3 in 1 is a revolutionary high performance flooring adhesive, moisture control, and sound reduction membrane all in one. Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology is used in this formulation, maintaining the superior long-term durability. Uses – Suitable substrates include: concrete, terrazzo, ceramic tiles, timber, plywood and cement backer board – Adheres parquet, cork, solid strip softwood, hardwood flooring, engineered flooring and bamboo flooring. Application – Apply full trowel method with Bostik 6mm V Notch Trowel. Refer to trowel selection chart for guidance. – 80 – 95% contact coverage when used as an adhesive only; 100% contact coverage when used as adhesive, moisture and sound control. – Evenly spread the adhesive and begin to install the flooring immediately with enough pressure to ensure full adhesive contact. – Periodically lift boards immediately after installation to ensure proper slab coverage and transfer to the back of the flooring is achieved. – For solid strip flooring, the preferred method to maintain pressure is to weight the floor. As per ATFA guidelines, the floor can also be temporary or permanently nailed. – If a thin skin forms on the adhesive prior to installation, re-trowel 90° to the ridges until no sign of the original trowel mark remains. Adhesives that has cured too much prior to installation of the flooring must be removed and re-apply fresh adhesive. Coverage Coverage will vary depending on substrate conditions and trowel size used. Below are estimated coverage per 16kg pail of Ultraset® 3IN1.